-
Who this checklist is for
-
The 7-step PV inverter sourcing checklist
-
1. Define the actual project need before you ask for quotes
-
2. Qualify the distributor, not just the product
-
3. Calculate total landed cost, not the quoted unit price
-
4. Verify certifications and grid-code scope
-
5. Confirm warranty entity, terms, and spare-parts path
-
6. Test the technical support and firmware process
-
7. Run a small first order and document everything
-
1. Define the actual project need before you ask for quotes
-
Notes and common mistakes
Who this checklist is for
I'm an office administrator for a 120-person solar EPC. I manage equipment and service procurement—roughly $1.8M annually across 14 vendors. I report to operations and finance. I don't design arrays, and I'm not an electrical engineer. But I'm the person who has to make sure the PO, invoice, freight, warranty paperwork, and RMA path actually work after the quote looks good on paper.
This checklist is for B2B buyers doing PV inverter sourcing: distributors, wholesalers, EPCs, and project developers who need to vet a PV inverter distributor before placing a first order. It's built for residential and small commercial orders, not utility-scale central inverter deals. My experience is based on about 60 PV inverter and storage orders across 4 years. If you're buying megawatt-scale BESS or central inverters, your process will be different.
What was best practice in 2020 may not apply in 2025. The fundamentals haven't changed—you still need the right product, at a workable landed cost, with support that shows up after the sale. But the execution has transformed. Certifications change, grid codes update, firmware matters more, and distributors now compete on logistics and service, not just unit price.
The 7-step PV inverter sourcing checklist
1. Define the actual project need before you ask for quotes
Don't start with a brand. Start with the site and the goal. For a hybrid system, you need to know backup loads, battery voltage, grid code, and whether the inverter will be AC-coupled or DC-coupled. If you're comparing a Sungrow SH10T hybrid inverter against another unit, don't compare brochure wattage only. Ask for the exact model version, datasheet revision, and applicable grid-code certificate.
Checkpoint: you can write one paragraph that says what the inverter must do, where it will be installed, and which certifications the AHJ (authority having jurisdiction—usually your local inspector or utility) requires. If you can't, you're not ready to request quotes.
2. Qualify the distributor, not just the product
A good product from a bad distributor becomes a bad project. Ask three questions: Are you an authorized distributor for this brand? What's your return-and-replace process? Who handles firmware and technical support in my time zone?
For scale, use public shipment data as a sanity check. Sungrow reported 130 GW of PV inverter shipments in 2023 (Source: Sungrow 2023 annual report). That doesn't mean every Sungrow order is automatically right for you. It does mean the supply chain is likely mature enough to support spare parts and documentation—if you're buying through an authorized channel.
Checkpoint: get the distributor's authorization letter or verify the relationship with the manufacturer's local office. I've seen resellers claim distributor status when they're really just brokers.
3. Calculate total landed cost, not the quoted unit price
People assume the lowest quote means the distributor is more efficient. What they don't see is which costs are hidden or deferred. I now build a simple landed-cost sheet: unit price + freight + duties + insurance + payment fees + expected RMA freight. On a recent 20-unit hybrid inverter order, the cheapest quote became the second-most expensive after freight and extended support were added.
Checkpoint: every quote gets the same columns. If a distributor won't put freight, lead time, and warranty entity in writing, that's a warning sign.
4. Verify certifications and grid-code scope
This is the step most buyers skip. They see a PDF logo and assume it covers the project. It doesn't. Certificates have scope, version, and expiry. For a microinverter specification guide, for example, don't just check peak output. Check MPPT count, max input voltage, CEC efficiency (California Energy Commission weighted efficiency), communication type, rapid shutdown compliance, and the exact grid-code certificate for your region.
Per FTC advertising guidelines (ftc.gov), vendor claims need to be truthful, not misleading, and substantiated. That's why I ask for the full certificate and test report, not just a brochure page. If a distributor says a unit is 'compatible with all major batteries,' I ask for the approved battery list and firmware version.
Checkpoint: match certificate scope to the project address and utility. If the AHJ needs UL 1741 SB or a specific grid-code version, the certificate must say so.
5. Confirm warranty entity, terms, and spare-parts path
A 10-year warranty is only useful if you know who honors it. Is it the manufacturer, the distributor, or a third-party insurer? What's excluded? What proof of purchase is required? I've learned to ask for the warranty document before the PO, not after a failure.
Checkpoint: write down the legal entity, claim portal, required documents, and average RMA turnaround (return merchandise authorization—how you send a failed unit back). Also confirm whether advance replacement is available or whether you must ship the failed unit first. That affects your project schedule more than the unit price.
6. Test the technical support and firmware process
Modern inverters are software devices with cables. Before you buy, create a test ticket. Ask the distributor: How do I get the latest firmware? Who provides monitoring setup? What happens when a communication error appears at 4 p.m. on a Friday?
If you're sourcing Sungrow, ask for the local service partner and the monitoring platform onboarding process. The goal isn't to get a sales answer. The goal is to see whether support exists before you've paid.
Checkpoint: get a named support contact, not a general email. Confirm spare-parts lead times for the specific model.
7. Run a small first order and document everything
I don't switch all volume to a new PV inverter distributor on day one. I run a small order—2 to 5 units—and track quote accuracy, packaging, delivery, invoice matching, and support response. In our 2024 vendor consolidation project, this step caught a distributor that couldn't provide proper invoicing for a tax-exempt project. Finance rejected the expense, and we saved ourselves a much bigger mess.
Checkpoint: after the pilot, score the distributor on a simple 1-5 scale for delivery, documentation, support, and RMA. If any category is below 3, don't scale yet.
Notes and common mistakes
- Don't assume compatibility. Battery, meter, and grid-code compatibility must be verified with the official approved list and current firmware.
- Don't chase the lowest price. The lowest quote often hides deferred costs in freight, support, or RMA handling.
- Don't accept a warranty summary as the warranty. Read the actual terms and confirm the legal entity.
- Don't ignore firmware. A hardware spec sheet without firmware version control is incomplete.
- Don't buy from a broker if you need local service. Use an authorized PV inverter distributor with a documented escalation path.
My experience is based on about 60 orders for residential and small commercial PV and storage projects. If you're working with utility-scale inverters or cross-border projects with different Incoterms, your checklist will need more legal and logistics review. But the core habit is the same: verify the boring stuff before the PO, because the exciting stuff—the install, the commissioning, the happy customer—depends on it.